logo
Contact us

We proudly present you our

Mobile filtration equipment

Whether it's an ISO tank filtration or storage tank containing 50000 m³, we have the right equipment available to solve your off-spec problem!

Only a small selection of our equipment is displayed on our website. For more info regarding our mobile filter equipment, please contact us!

Our 20ft scrubber setup at a storage terminal, deployed to rectify a parcel of Methanol failing on IMPCA specifications.

Two 20 ft stainless steel scrubber units (PED Category : IV) were connected in parralel in order to complete the filtration of approximately 50.000 m³ in two weeks time.

Curstomer requirements are made reality at MarTest!

about-us

Particle filter units - Rental & service fleet

about-us

  • Our inventory provides a wide range of stainless steel particle filters, developed by MarTest Cambrian.
  • Dedicated EI-1596 aviation fuel filtration certified equipment available for on-site filtration of JET-A1
  • Flow rates from 10 m³/h up to 1000 m³/h.
  • Mesh sizes starting from 0.5 µm
  • High pressure equipment available for gas filtration (60 bar).
  • Bag filter units containing up to 19 added area filter bags.
  • Filter cartridges are available from stock: polypropylene, cotton, stainless steel, glassfiber, etc.
  • All particle filer equipment is fully certified according to PED/CE including pressure test documentation
  • Due to relatively small dimensions and weights of our equipment, MarTest Cambrian is able to be on site rapidly and connect practically everywhere

  • Developed and manufactured by MarTest Cambrian Group
  • Fully certified according to PED Cat IV/CE including manufacturing data book, design appraisal and pressure test documentation.
  • Designed and constructed according to EN 13445 Directives.
  • Replace used absorbent under safe conditions while limiting vapour emissions till ZERO.
  • Completely stainless steel 1.4404. Fully pressure tested - 23.11 bar test pressure - 15 bar working pressure.
  • Operating temperatures varying between -20°C and 100°C
  • Practical dimensions in order to be on site rapidly; Our units can be transported by truck and by air-freght cargo plane.

Small absorber unit (Scrubber)

about-us

Big absorber unit (Scrubber)

about-us

  • Developed and manufactured by MarTest Cambrian Group
  • Fully certified according to PED Cat IV/CE including manufacturing data book, design appraisal and pressure test documentation.
  • Designed and constructed according to EN 13445 Directives.
  • Replace used absorbent under safe conditions while limiting vapour emissions till ZERO.
  • Completely stainless steel 1.4404. Fully pressure tested - 23.11 bar test pressure - 15 bar working pressure.
  • Operating temperatures varying between -20°C and 100°C
  • Volume of 8250L - Reconditioning of large parcels without delays.
  • Stainless steel fixed driptray
  • Walkway for safe working at heights
  • Multiple pressure gauges and temperature gauge for process monitoring.
  • Unit is mounted in a 20 ft contained frame for safe transport and positioning on site.

"we have the right equipment available to solve your off-spec problem!"

mechanical_filtration

Mechanical filtration

Maximum flowrate for mechanical filtration = +/- 1000 m3/h

  • Iso cleanliness code < 15-12-9
  • Total contamination rectification
  • Removal of visible and invisible particle contamination
  • Dedicated EI-1569 aviation fuel particle + coalescer filter available for on-site filtration of JET-A1 (water content removal)

mechanical_filtration

Chemical filtration

Maximum flowrate for mechanical filtration = +/- 150 m3/h

  • Water specs < 5 ppm
  • Chloride specs < 0,25 ppm
  • Peroxide specs < 1 ppm
  • Colour specs < 5 Pt-Co
  • UV specs rectification
  • And so on...

mechanical_filtration

Magnetic filtration

Maximum flowrate for Magnetic filtration using MAGFIL-300 ATEX filter = 350 m³/h

Removal of magnetic particles at submicron level by means of patented magnetic filtration techniques, developed by MagFil

More info to be found: www.magfil.com

Operational conditions

Working temperature

about-us

Highest Temp

+48 C / +118 F


Lowest Temp

-25 C / - 13 F

Product typical's

Lowest 0.600 kg/l
Highest Density 1.800 kg/l
Lowest Flash Point -20 C
Lowest Boiling Point -6 C / 21 F
Lowest Vapor Pressure at 20 C 2500 mbar

For service requests or more information regarding our services

Contact us!